(/ )

Gold Member Audited Supplier of Made-in-China.com 3D Demo

Capacitors Knowledge

How to Install a Capacitor
How to hook up a capacitor?
How to Discharge a Capacitor
What is capacitor ESR?
Capacitor Installation Tips
How to build a capacitor tester
History of the Capacitor
All Types of Capacitors
How a Capacitor works
Use of Capacitors
What's Capacitors
How to build a capacitor tester [Sep 01,2010]
How to build a capacitor tester

Most circuits use bypass capacitors and can deliver substandard performance if the capacitors have poor pulse characteristics. Few if any articles cover how to test bypass capacitors for pulse characteristics. The circuit in Figure 1 tests these characteristics. It charges the capacitor under test through 100 kΩ for approximately 1 msec and then discharges it through 10Ω for approximately 40 nsec. The cycle then repeats. The circuit uses a double-sided copper-clad pc board. All the components except the 10Ω resistor connect to one side of the board, so they can benefit from shielding by the cast-aluminum enclosure (Figure 2). All leads are as short as possible and as close as possible to the copper-clad board. The layout is such that you don’t need the oscilloscope probe’s ground lead; the ground on the probe contacts a ground post on the pc board. The ground posts, feedthroughs, connections to the capacitor under test, and oscilloscope probes use vector-board terminals.

The circuit comprises an astable multivibrator using two 2N3904 transistors, Q1 and Q2, and associated components. A voltage reducer/shaper uses a trimmer capacitor, C1; a 100-pF capacitor, C2; and a 200Ω resistor, R1. An amplifier uses a 2N3906 transistor, Q3, and associated components, and a power amplifier uses a PN2222A transistor, Q4, and associated components. C1, C2, and R1 produce a fast rise- and fall-time, 0.7V pulse when the multivibrator’s output switches negative. Because the Q3 transistor has no bias, it conducts only at the peak of the input pulse and produces a pulse with fast rise and fall times. The output from the Q3 drives Q4, causing that transistor to conduct for approximately 40 nsec. You can obtain interesting results when testing capacitors with long leads and then testing the same capacitors with short leads, corroborating the universal advice to keep leads short.

Quick products:

Metallic Polypropylene Film Capacitors
Motor Run/Start Capacitors
Fan Capacitors
Air Conditioner Capacitors
Lighting Capacitor
washing machine capacitor
Aluminum Electrolytic Capacitors
AC Aluminum Electrolysis Capacitor
DC Aluminum Electrolysis Capacitor
Power Capacitors
Parallel Connection Power Capacitors

Related Links

EACO Capacitor Inc.
2nd Year Audited Supplier
Guangdong, China
Member Since: 2010
Business Type: Manufacturer